DAQ1x1 Base FPGA
FPGA design of the base board of the SuperMuSR ADC120 (v2 hardware): a Kintex-7
xc7k160tfbg676-1 with a MicroBlaze inside that drives the OLED display, the I²C sensors and
the SPI flash of the board. Every build produces one configuration image with the MicroBlaze
application already in it, and the package carries the two the board needs: the bootloader,
which the FPGA loads at power up, and the firmware, which the bootloader reconfigures the
FPGA with. Keeping both in one release is what makes a board reprogrammable in the field: the
bootloader stays, the firmware is what gets replaced.
Built with Vivado/Vitis 2020.2 in two steps — the MicroBlaze application, compiled against the
platform generated from top_base.xsa, then the implementation that embeds it in the bitstream.
License:
You may also like
DAQ141
High-performance, fully integrated digitizer developed by Nuclear Instruments for advanced SiPM-based muon detection systems
DT5571
High-performance waveform digitizer featuring 14-bit resolution and a 200 MS/s sampling rate on a single analog input.
DT5560SE
Compact, desktop-form-factor digitizer designed for laboratory development, prototyping, and system testing
Sci-SDK
Cross-platform SDK to control and acquire data from FPGA firmware generated with Sci-Compiler.
Sci-Compiler
Advanced visual programming environment designed to simplify the development of FPGA-based systems for scientific instrumentation, industrial control, and custom electronics.
Wave Flow
Real-time waveform acquisition and signal analysis software for scientific applications
Trending Products
DT5560SE
Compact, desktop-form-factor digitizer designed for laboratory development, prototyping, and system testing
DAQ121
High-performance, fully integrated digitizer developed by Nuclear Instruments for advanced SiPM-based muon detection systems.
DAQ141-6
High-performance, 6-channel waveform digitizer developed by Nuclear Instruments for demanding scientific and industrial data acquisition.
Trending Packages
Quanta
Acquisition and analysis software for the Nuclear Instruments digitizer platform — the software layer of the QuantumBox chain.
Sci-Digitizer
Windows readout and analysis software for the Nuclear Instruments Open Hardware digitizers.
Sci-Compiler
Advanced visual programming environment designed to simplify the development of FPGA-based systems for scientific instrumentation, industrial control, and custom electronics.